ARTICKK
Call +91 99782 88122 Get In Touch
Tile Grout
/ 2
Chemical • Grouting Solutions Stain & Chemical Proof 100% Impermeable

Tile Grout

Fine polymer-modified, water-resistant cement-based powder grout suitable for floor and wall tile joints up to 3 mm.

Available for Supply
Link Copied!
Standards & Testing:
30 min
WhatsApp Desk
Calculate Quantity & Coverage →
Direct Factory Supply
Pan-India Logistics
Certified ISO / EN Quality
On-Site Technical Advice
Packaging / Unit: 1 kg
Specification Standard: 30 min
Hygienic Joint Engineering

Impenetrable Architectural Tile Joints

Fine polymer-modified, water-resistant cement-based powder grout suitable for floor and wall tile joints up to 3 mm.

Joint Performance Matrix

Lab Verified
Supported Joint Width:
1 mm – 12 mm
Water Absorption:
Nil (100% Impermeable Barrier)
Chemical Resistance:
Acids, Alkali, Detergents, Sanitizers
Bacterial Resistance:
Anti-Fungal & Anti-Bacterial
UV Discoloration:
Non-Yellowing Formula
Site Engineering Protocol

8-Step Mixing & Installation Protocol

Adhere to these standardized architectural application phases for maximum tensile adhesion and zero hollow debonding risk.

01 PREP

Substrate Preparation

Ensure substrate is structurally sound, clean, dry, free of oil, dust, efflorescence, and loose debris before application.

Standard Protocol
02 RATIO

Water Proportioning

Measure clean potable water in precise ratio (~20–25% by weight, approx 4.5–5.0 L per 20kg bag) into a clean mixing bucket.

Standard Protocol
03 MIX

Mechanical Mixing

Add powder gradually into water while stirring with a slow-speed electric paddle mixer (300–400 RPM) to achieve a smooth, lump-free paste.

Standard Protocol
04 SLAKE

Slake Time (Resting)

Allow mixture to slake for 3–5 minutes undisturbed. This allows active polymers to fully dissolve and chemical adhesion to trigger.

Standard Protocol
05 RE-MIX

Brief Re-Stirring

Re-mix briefly for 1 minute without adding extra water or powder. The mixture is now ready with a smooth, buttery trowel consistency.

Standard Protocol
06 NOTCH

Notched Application

Apply adhesive using flat side of trowel, then comb with notched side held at a 45° angle in one direction to create uniform ribs.

Standard Protocol
07 BEDDING

Tile Bedding & Alignment

Press tile firmly into wet adhesive with a twisting motion to collapse ribs and achieve >85% bed contact (>95% in wet/exterior spaces).

Standard Protocol
08 CURE

Curing & Grouting

Allow adhesive bed to cure undisturbed for 24 hours before subjecting to foot traffic or executing joint grouting with ARTICKK Grout.

Standard Protocol

Jobsite Engineering Directive

Do not add water or powder to mortar that has begun to set. Discard any expired mortar past its pot life.

Download Installation Manual →
Verified Architectural Data

Technical Mechanical & Flexural Parameters

Tested and verified against international architectural standards.

ISO / EN Laboratory Certified
Pot Life30 C
60 min
Open Time
30 min
Adjustability
15–20 min
Initial Set R T
2 hour
Final Set R T
8 hour
Shrinkage
<0.1%
Water Absorption
8.3%
Pack Size
1 kg
* Values verified under standard laboratory ambient conditions (23°C ± 2°C, 50% ± 5% RH). ARTICKK Architectural Quality Assurance
Technical Estimator Workbench

Coverage & Material Calculator

Calculate the exact quantity of Tile Grout required for your project floor or wall surface area with calibrated notch depth and cutting reserve.

Manufacturer Consumption Baseline
5 to 5.5 m² @ 3 mm per 20kg bag
For large-format porcelain slabs (>600×1200 mm), a 10mm to 12mm notch with back-buttering is strongly recommended for 100% bed contact.
Square Feet (Sq. Ft.)
SQ FT
Estimated Material Requirement:

* Calculation is based on standard dry cementitious paste density on flat screed. Actual site consumption may vary depending on substrate levelness and installer trowel angle.

Holistic Surface Architecture

Comprehensive System Compatibility

Pair seamlessly with ARTICKK high-grade vitrified tiles, epoxy grouts, and surface care.

Complete System Warranty Guaranteed
Substrate Layer Cutaway Architecture
3D Multi-Layer Cutaway Zero Void Assurance
Substrate Engineering Directive

Engineered Multi-Layer Bonding Integrity

From cured concrete screed to high-polymer adhesive ribs, tile surface, and impermeable joint seal—each layer is formulated to function as a unified structural envelope.

Zero Hollow Spots
100% Waterproof Bond
High Shear Resistance
Thermal Expansion Buffer
Stage 01 Surface

ARTICKK Premium Surface

Large-format porcelain slabs, vitrified tiles, natural granite, or luxury wall cladding.

Precision Dimensioned
Stage 02 Bonding

ARTICKK NSA Adhesive

High-polymer modified cementitious or polyurethane adhesive bed with zero sag.

A400 / A300 / PU-FIX
Stage 03 Grouting

ARTICKK Epoxy Grout

Impermeable 2-part stain-free architectural joint grout resistant to chemical and UV attack.

100% Water Impermeable
Stage 04 Protection

ARTICKK Surface Care

Acid-free post-installation cleanout and long-term luster preservation formulas.

Permanent Radiance
Official Architectural Documents

Downloads & Technical Dossier

Direct access to official brochures, laboratory data sheets, and engineering installation protocols for Tile Grout.

Master Edition PDF • 24.8 MB

Comprehensive Product Catalogue

ARTICKK_Master_Product_Catalogue.pdf

High-resolution architectural publication with collection lookbooks, series breakdown, and surface dimensions.

Download Catalogue
Verified Lab TDS PDF • 1.4 MB

Technical Data Sheet (TDS)

tile-grout-technical-data-sheet.pdf

Complete chemical and physical parameter breakdown, mechanical shear strengths, EN 12004/IS classifications, and shelf life.

Architectural Guide PDF • 3.2 MB

Architectural Installation Manual

artickk-standard-installation-guide.pdf

Surface preparation, expansion joint placements, notch trowel sizing, and curing protocols for zero hollow sound.

Technical Knowledge Base

Frequently Asked Questions

Practical architectural insights on surface preparation, coverage ratios, pot life, curing times, and proper specification for your project.

Engineering Support Desk

Have specific project questions?

Unsure about slab thickness, substrate movement joints, or outdoor climate suitability? Speak directly with our senior technical specialists.

Contact Desk

This product is suitable for: bathroom tiles, kitchen backsplashes, and floor joints. It ensures locked, aesthetic tile joints.

Yes, Tile Grout provides excellent resistance to water ingress under normal usage. For continuous water contact or chemical exposure, we recommend upgraded epoxy grouting.

Ensure joints are dry, clean, and free of dust, standing water, and residual tile adhesive. Scrap/clean at least 2/3rd of the tile thickness depth for optimal grout bond.

Mix Tile Grout with clean water (or ARTICKK Grout Admixture to enhance flexibility) to a thick, smooth, creamy paste. Press the paste firmly into joints using a rubber float diagonal to the joints.

Clean immediately! Use a damp sponge in a circular motion to shape the joint and remove residue. Rinse the sponge frequently in clean water. For epoxy grout, complete cleanup within 30-45 minutes before it hardens.

It takes about 24 hours for initial cure to allow foot traffic. Full chemical curing and stain resistance is achieved in 7 days.

Yes. Grout comes in multiple colors to match or contrast your tiles. Ref to the color card or contact the nearest ARTICKK dealer for samples.
Tile Grout
ARTICKK landmark architectural project consultation
Project Specification Desk

Ready to specify Tile Grout for your project?

Connect directly with the ARTICKK technical specification team for contractor volume pricing, site testing, physical samples, and comprehensive project support.

WhatsApp Desk Call Specialist Master Catalogue